Friday, December 16, 2011

PRO BLASTER WASHDOWN PUMP, 4.0 GPM

!: Shop For PRO BLASTER WASHDOWN PUMP, 4.0 GPM fast

Brand : Shurflo | Rate : | Price : $175.79
Post Date : Dec 16, 2011 12:36:04 | Usually ships in 1-2 business days


OEM# 4901-4292
Aftermarket4901-4282
DescriptionSealed Switch, Run Dry Capability, Ignition Protected, Waterproof Seamless Motor Shell, Blaster Nozzel and Fittings Included.
Voltage12 VDC
Dimensions8.3" x 5.3" x 5.0" [210 x 136 x 127mm]
Flow Rate4.0 GPM [15.1 LPM]
Amps (Max)10
Shut-Off Pressure45 PSI [3.1 BAR]

More Specification..!!

Order Msi Net Book Shopping Osprey Porter 90 Travel Pack

Sunday, December 11, 2011

Monday, December 5, 2011

Underground Irrigation Repair Without Digging - All it Takes is a Heat Gun!

!: Underground Irrigation Repair Without Digging - All it Takes is a Heat Gun!

I developed this irrigation repair technique out of desperation. A sprinkler head had launched itself out of the ground right beside me one day and landed in a potted plant. The resulting geyser was spectacular, but the location was horrible!

The area around this particular sprinkler head was surrounded in paving stone and brick, and worse, right up against a fence. To make things harder, I had installed a french-drain only a foot away! The riser's nipple was missing. Sure enough, a replacement stand-pipe wouldn't even begin to screw in! Obviously, the broken off part of the nipple was stuck in the t-connector - deep underground! Before I developed this technique, I would have had to dig lateral trenches about 2' long on each side of the connector, cut the supply lines off each end of the connector, added a sleeve and spacer, then glued in a replacement t-connector. Not this time! There was too much involved in digging this connector out of the ground!

I have a special purpose tool I'd bought from The Home Depot just for this problem. It's the PVC variant of an "easy-out." Unfortunately, it wouldn't work! I couldn't get enough pressure (the connector was buried just about the extractor's full length), and I kept scraping my knuckles against a fence post. The stand-pipe wasn't PVC, it was vinyl. It was so slick, the knife edges of the extractor wouldn't bite into the inside edge.

But vinyl melts! I have a 1200 watt heat gun I'd bought for paint stripping. The extractor's tip is metal and by using this heat gun, I got the extractor's tip hot. Real hot. Sizzling hot! By pushing the extractor straight down the hole, it gently melted into the broken off nipple - deep underground! I let it set and cool for a few minuets before giving it a twist. Two seconds later, the broken off nipple was extracted!

After screwing in a replacement riser, I cycled the irrigation pump to that zone to rinse out all of the dirt that had fallen into the connector. I put a new sprinkler head on the replacement riser, and guess what? That irrigation repair was done. Not only done, I didn't have to dig one spade of dirt!

The trick was heating up the extractor's tip hot enough to melt into the broken off vinyl nipple to get a grip.

A few weeks later, I had a different problem. I had mounted new window boxes along one side wall of my home and wanted to use my in-ground irrigation system to water the new flowers. I had a capped off riser right where I need to place a 4' riser. Unfortunately, this was an old steel riser that I'd bumped into several times with the mower, and when I removed the pipe it left the t-connector's threads stripped and choked with rust-scale! Unlike most of my irrigation repair projects, this line is very shallow. Shallow enough for me to scrape away the top to really see the damage.

There wasn't anything I could do to thread the new riser into place, I was going to have to replace the t-connector - or maybe not. I have a pretty complete shop and I have metal working tools to tap holes for screw threads, or cut outside threads for bolts. Since I had to go to The Home Depot or Lowe's anyway for a replacement t-connector, why not see if they had a tool for pipe threads?

The staff at Lowe's laughed when I asked them for a tool to cut internal 1/2" pipe thread for an underground PVC t-connector! Their only advice was to dig it up and replace it. No Way! The staff at The Home Depot didn't laugh out loud, but they also suggested replacement fittings.

I did buy the fittings, but I also found the perfect tool - an 18" length of 1/2" steel pipe! Once again, the 1200 watt heat gun came to the rescue. By heating the pipe end, the thread section, I was able to plunge it into the buried t-connector. It sizzled as it sank in and I quickly worked it in deeper as I screwed it into place. Without letting it sit, I unscrewed the steel pipe to prevent it from welding into place. I repeated this operation several times until all of the pipe's threaded section was within the t-connector's nipple.

Guess what? The new replacement 4' PVC riser threaded itself right in! By using heat, pressure, and steel threads, I was able to partially melt the underground t-connector and cut new threads. Not a spade full of dirt was dug up for this irrigation repair!

Since then, I've helped neighbors with their irrigation repair projects that left them amazed - "you can actually cut new threads underground without having to dig" - Wow, thanks Bill, real big thanks!

Not all irrigation repairs can use this technique. Let's face it, if the t-connector's nipple or connecting pipes crack or break, you will have to dig. But try this tip first and see if it works. You'll know within minuets if there's a more serious problem. You'll get wet standing there, but you'll quickly see upwelling around the sprinkler head in operation if there's a broken pipe or cracked nipple. Oh well, at least you gave it a try!

I've had this cheap heat gun for more than twenty years. Not only does it do a great job lifting paint, I've used it for boat electrical repairs (heat-shrink tubing), removing self-adhesive vinyl tile, contact paper, and sanding disks, and even starting fires in my charcoal pit. This is NOT a hair dryer - keep safe, keep it away from you at all times!

In conclusion, I was able to use my cheap heat gun and cheaper steel pipe to apply enough heat and pressure to re-mold stripped out internal threads, and enough raw heat to let another tool's edges cut into material that without that tool, would have required digging lots of dirt for these simple irrigation repair projects!


Underground Irrigation Repair Without Digging - All it Takes is a Heat Gun!

Shopping Frye Paige Studded Boot Frye Carson Boot For Sale Pioneer 6x9 Car Speakers Immediately

Sunday, November 20, 2011

Alternate Fuel Sources - Why Oil Will Go $200-$300 Barrel

!: Alternate Fuel Sources - Why Oil Will Go 0-0 Barrel

What exactly is deriving oil prices high. Is less shortage of oil, oil production issues or simply demand for oil has sky rocketed. What we see today is only tip of iceberg. The day is not far when we will see oil barrel at 0 or more. While emerging economies are battling with established economies for control of third world oil for growth of business. The nations have started capturing untapped oil market for future expansion, along with current rising consumption of oil is the leading cause of price touching record high. What exactly, we have options for Fuel To Burn beyond Oil.

According to statistic, the America consumed 20 million barrels of petroleum every day in year 2006. This is really a big number but when we look at the numbers of China and India and other emerging economies the situation looks more grim.

There is urgency to come up with alternate fuel solution to oil, the world leaders, corporate leaders and environmentalist are working closely to create alternate fuels. The research universities are working tirelessly and corporate leaders are pumping huge amount for future fuel technologies.

We all know oil is made up of fossilized remains of ancient marine plants and animals, we also know this process takes millions of years to convert fossil into crude oil. The problem is there is a long process to get oil, where as demand for consumption is growing every minute in leaps and bounds.

What happens when we run out of oil?
Now the big question is, where do we stand if we run out oil. Already signs are not good. Refineries are running at high out put still not able to keep consumption requirements, Some of the oil rigs are running dry, sure signs of bad days. Some of the oil regions are involved in long conflict, resulting into delay and short supplies. Bottom line we no longer can depend upon on oil as major energy source.

Another factor, why alternate technologies for fuel are being pursued is the risk to environment. The most damage to earth has happened in last century, with explosion of industrial revolution and expansion of industries across all fields has created tremendous impact on global warming. People are able to see changes in environment, changing weather patterns, too much or no rain in different part of world, temperature soaring and glaciers shrinking all are signs of global warming.

The future needs are not only alternate fuel to gasoline but the future fuel has to be clean and no hazard to environment, unlike oil which creates greenhouse gases a prime reason of global warming. The next fuel will be clean, environment friendly, cheap and will be available in all countries. One more thing next generation fuel will help in reducing the tension among nations fighting for oil share.

The emerging economies China, India and Mexico are buying or leasing oil fields in Asia, Africa and Europe to keep their counties interest intact. The developed countries are busy in filling their oil reserves to safe guard national reserves. All this fight for oil and fierce competition among nation is bound to create conflict and war. The next generation fuel not only will help in reducing consumption demand but also help in keeping peace in world.

Now we have talked in length about the current issues related in respect to gap in demand supply of oil. Let's look at alternate fuels available and which one are in research.

"What is Ethanol fuel" and "how Ethanol fuel works"

One of the alternative fuel sought for oil or gasoline is Ethanol fuel . Any feed stock, which is based on carbon and after going through conversion process gives Ethanol. There is long list of carbon based items, such as sugar beets, corn, sugar cane, switch grass etc. The Ethanol fuel came in picture as clean alternate fuel and is environment friendly.

Currently Ethanol fuel is used as blend mixture with gasoline and is common at pump station across north America. It is also being used as oxygenate additive for gasoline and replacement for MTBE ingredient. The MTBE is a fuel compound which is responsible of contamination of ground water. Many states in America have put ban on use of MTBE and is being replaced by Ethanol. Read more on Ethanol ... How Ethanol Fuel Helps!

"What is Fuel Cell" and "how Fuel Cell works"

The Fuel Cell is a hardware device used in converting energy (Chemical) of a fuel such as "Natural Gas", "Hydrogen", "Gasoline". The conversion of chemical energy takes place with the help of an oxidant such as "Air" or "Oxygen" into an electricity. There are lot of similarities between Fuel Cell and Battery in principle, the major difference is Fuel Cell don't drain energy and don't require recharging. The fuel cell will keep generating energy as long it is supplied fuel and an oxidizer. Read more on Fuel cell ... How Fuel Cell Helps!

"What is Switchgrass fuel" and "How Switchgrass fuel works"

Another good candidate for alternate fuel source is the Switchgrass. The Switchgrass is described as a "Perennial Graminoid" and is native to America. The active period for this grass to grow is in summer. The life span of Switchgrass is long as compared to other plant species. The Switchgrass has rapid growth. The grass can grow from 5 ft to 12 ft. Most of the growth takes place in summer. The Switchgrass is resistant to drought and requires little attention or any fertilizer.

How fuel is produced from switchgrass feedstock - The Switchgrass is used as raw material to produce a distilled fuel known as Cellulosic ethanol. The Cellulosic fuel is derived by a chemical process , which involve breaking the Cellulose (Cell Wall in Plant) into basic components. Further, Yeast is assed and is left for fermentation process to create alcohol. Once alcohol goes through refined process, the resultant Ethanol can be used as Fuel. Read more on Switch grass .... How Switchgrass Energy Helps!

"What is Hydrogen fuel" and "how Hydrogen fuel works"

The initiative of using Hydrogen fuel as energy resource came from American government, scientist and environmentalist. The hydrogen fuel technology is based on simple chemical reaction between Oxygen and Hydrogen, the reaction generates energy. The resultant energy can be used as power a Car producing only water, not fumes.

The California state (America) was first to use hydrogen powered cars, currently few hundred automobiles are running in California. The cars have special storage to store Hydrogen in form of gas or liquid and process converts the hydrogen into electricity for the engine using a fuel cell. This project is still in early stage, with more research the technology will become more robust and commercially viable. Read more on Hydrogen fuel .... How Hydrogen fuel Helps!

What is Biodiesel Fuel and "how BioDiesel Fuel works"

Biodiesel is the name of a clean burning alternative fuel, produced from domestic, renewable resources. Biodiesel contains no petroleum, but it can be blended at any level with petroleum diesel to create a biodiesel blend. It can be used in compression-ignition (diesel) engines with little or no modifications. Biodiesel is simple to use, biodegradable, nontoxic, and essentially free of sulfur and aromatics.

The BioDiesel fuel is clean, very efficient and clean burning alternative fuel. The Biodiesel fuel is more environment friendly. The fuel can be easily mixed with petroleum diesel and can be used in diesel engines (Compression Ignition).

The process of making Biodiesel is through a chemical process called Transesterification" , In this process the "glycerin" is separated from the vegetable oil or fats. The result of chemical process is two products. One is "methyl esters" and other is "glycerin". The chemical name known for Biodiesel is called as "methyl esters". Read more on Biodiesel fuel ... Help Biodiesel Fuel Helps!

"What is Wind Power (Wind Turbine)" and "how Wind Power works"

The wind power is not new concept, it has been used as energy source in western countries for some time. Only now it is catching fast at commercial scale not only in western countries but also in developing countries. The concept behind Wind Power is to capture kinetic energy through fast moving wind. Even air has fluid in the form of small particles is gas. These particles move quickly in the form of wind.

The quick motion through air means kinetic energy. This kinetic energy is captured by specially designed turbine blades. After capturing the kinetic energy, the turbine start moving, the movement of blade spins underneath shaft that has connection with generator. Rest of the processing is done by generator by converting rotational energy into electricity. Read more on Wind Energy ... How Wind Power Helps!

"What is Nuclear Fuel" and "how Nuclear fuel works"

The word Nuclear is enough to scare any one and on top of it subject as nuclear energy is enough to confuse people. The global energy is much talked subject, thanks to scientist, environmentalist and government agencies people now know the impact of it. The quest for alternate energy is at war foot, tons of money is being poured into research by government and private industries. Countries around world are debating about building more nuclear reactors and how to safeguard them. Read more on Nuclear fuel ... How Nuclear Power Helps!


Alternate Fuel Sources - Why Oil Will Go 0-0 Barrel

Noren Door Curtain Tips Shop Pondmaster Pumps

Friday, November 18, 2011

LFTR in 5 Minutes - THORIUM REMIX 2011

Tile Wet Saw Discount Tile Saw Mk Quickly

Friday, November 11, 2011

Why Does My Stomach Hurt After I Eat?

!: Why Does My Stomach Hurt After I Eat?

Your doctors won't tell you this, but the cause of your stomach ache and why your stomach hurts after you eat may have nothing to do with having a disease or a condition.

You might have been told you have a disease or condition like Acid Reflux, Gastritis, Diverticulitis, Diverticulosis, Colitis, Crohn's (IBD), IBS, Ulcer, Hiatal Hernia, heartburn, diarrhea, constipation, gas, and or bloating.

They'll tell you that because they don't really understand the underlying causes. Doctors treat symptoms, they really don't address causes. That went out the door when the doctor left house calls behind. The old-fashioned doctors knew why you were having problems because they visited you in your home and understood your lifestyle.

Most doctors today have to look at your file to remember your name.

Did you know that eating a simple meal of meats and potatoes can send your stomach into grueling pain? Why?

Because you're combining the wrong kinds of foods together. Meats are an acid-forming food, potatoes are low alkaline, so they are considered alkaline causing foods.

Combining foods that require acid forming enzymes to break them down in the digestive tract when mixed with foods that require alkaline-forming enzymes to break them down counteract each other, canceling each other out. When this happens, the food doesn't go anywhere it sits in your stomach, fermenting.

Thirteen hours later your food isn't digested yet and then you get up and eat more foods on top of that fermenting stomach, no wonder you're gaining weight. Additionally, you're adding toxins by the boat load to your system.

So you go to the doctor and get relief, a prescription for a proton-pump inhibitor, something to keep the acid from forming, only after taking it for a few weeks, you're back at square one. Why? Because the body realizes there's not enough acid in your system for breaking down the food (that of course is stagnated) and you end up with even more acid that is now regurgitating it's way back up your throat.

There is a way to end this nightmare and it has to do with learning what foods to combine with what. Developing a healthy eating plan that is based on your body's needs doesn't have to be painful. You can still eat the foods that you enjoy, as long as you eat them separately from the foods that don't combine well with them.


Why Does My Stomach Hurt After I Eat?

Help Poulan Electric Pole Chain Saw Used Gibson Guitars Life Tips


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。